46
6.3
1059.tif
R
G
T
S
F
Operator Manual
H.
Check and discharge the water every day from
air filter/ water separator ‘
F
’ by pressing the “
S
”
button (Fig. 6-3).
I.
The machine is equipped with an automatic
lubricator. Check the oil level weekly. When adding
oil to the lubricator, disconnect the air supply first,
and add oil as needed. Make sure seals are in place
when repositioning the cup.
USE ONLY OILS FOR AIR DEVICES, DO
NOT USE BRAKE FLUID OR OTHER NON
RECOMMEND LUBRICANTS.
Suggested oils for the filter/lubricator unit:
TAMOIL
: WHITE MINERAL OIL 15
SHELL
: ONDINA OIL 15
BP
: ENERGOL WT3
TOTAL
: LOBELIA SB 15
ESSO
: MARCOL 82
J.
Periodically check the lubricator efficiency. One oil
drop (
G
, Fig. 6-3) every 4-5 operations of the bead
breaker indicates that the correct amount of oil is
being dispersed in the system.
If necessary adjust the oil flow with screw (
R
,
Fig.6-3).
K.
If the machine is also equipped with a beading
unit for tubeless tires, drain condensation from the
tank daily.
6.1
Storage
In case the machine is not to be used for a long period
of time (6 months or more) it is necessary to disconnect
all power sources, discharge the bead seater tank (only
Tubeless bead-seating version machines), protect
all parts that may be damaged, protect the air hoses
that may be damaged by the drying process. When
putting the machine back in operation, check first the
condition of all previously protected parts, and check
for correct functioning of all devices before using the
machine again.
Summary of Contents for Monty 1270 Smart
Page 54: ...54 B L A N K P A G E ...
