monty 3650
Betriebsanleitung Operator’s Manual Notice d’ utilisation
Modéle:
monty 3650
_ DE-EN-FR_ Release December 2018
HOFMANN behält sich das Recht zu Änderungen ohne Vorankündigung vor _ HOFMANN reserves the right of modification without notice _ Document non contractuel
32
4.0 CONTROLS
Before operating the machine ensure that you have
well understood the operation and function of all
the controls.
A.
To turn the machine on, rotate the ON/OFF
switch to position
1
: the pump motor starts
turning and remains in operation until when the
machine is turned off. The power required is
minimum when the hydraulic cylinders are not in
use.
NOTE:
IT IS SUGGESTED TO TURN THE MACHINE OFF AFTER
EVERY MOUNTING OR DEMOUNTING OPERATION, IF
THE TIME BEFORE THE NEXT OPERATION IS LONGER
THAN 5 MINUTES.
B.
Operate the chuck rotation switch (#1 Fig.14) to
the right : the chuck rotates clockwise.
Operate the chuck rotation switch to the left : the
chuck rotates counter-clockwise.
C.
Operate the chuck arm control (#2 Fig.14) to
position
A
: the chuck arm moves upwards.
Operate the control to position
B
: the chuck arm
moves downwards.
D.
Operate the toolholder carriage control (#3
Fig.14) to position
A
: the carriage moves towards
the machine.
Operate the control to position
B
: the carriage
moves away from the machine.
270
Fig.14
E.
Use the toolholder arm lock levers (#1 Fig.15) to
lock and release the toolholder arms.
272
Fig.15
F.
The hexagonal shaft can be locked in 3 different
positions. Operate the chuck shaft lock/release
lever (#1 Fig.16) and slide axially the shaft.
Make sure that the shaft is properly locked in
position.
273
Fig.16
Summary of Contents for monty 3650
Page 62: ...62 ...
