monty 4400
Betriebsanleitung Operator’s Manual Notice d’ utilisation
Modéle :
monty 4400
_D _GB _F - Release D
HOFMANN behält sich das Recht zu Änderungen ohne Vorankündigung vor _ HOFMANN reserves the right of modification without notice _ Document non contractuel
45
For tube type only, the valve should be placed at
12 o'clock, for easier mounting.
2.
Slide the tire onto the rim with the footboard or
with the bead breaker disc, if necessary.
3.
Mount all the assembly components.
4.
Engage one edge of the lock ring in its seat and
complete the mounting process with the bead
breaker disc.
In the initial mounting phase hold the rim edge in
its seat with a bar (Fig.41).
588
Fig.41
DO NOT INFLATE THE TIRE ON THE
MACHINE. THIS MACHINE IS NOT AN
INFLATION DEVICE.
FOR INFLATION PLACE THE WHEEL IN
AN APPROVED INFLATION RESTRAINT
DEVICE (IN THE UNITED STATES OF
AMERICA
CONSULT
O.S.H.A.
REGULATIONS
CONCERNING
THE
PROPER
SERVICING
OF
TRUCK,
WHEELS AND RIMS).
5.8 DEMOUNTING TRACTOR AND O.T.R. WHEELS WITH
ONE-PIECE RIMS
These wheels may be tube-type or tubeless.
The rim has a slightly conical surface and a very
high rim flange (Fig.42) which does not allow you to
demount the tire by simple pressure as described in
@5.2.
430
Fig.42
1.
Remove all wheel-weights from the rim.
Remove the valve stem or core and deflate the
tire.
2.
Place the disc tool next to the rim edge and
bead break the inner bead as described in
@5.2.
3.
Break the outer bead in the same way, taking
care not to damage the valve stem (Fig.43).
589
Fig.43
