27
7.6 Seat bearing
- Check for general damage
- Insertion of the seat unit in the channel bearing
- Function of the release
- Seat tilt, locking of the bolts in the tilt skids
Check of the screw connections:
- Screwing of the edge runners to the seat bearing plate and side panel.
- Fastening of the release button
- Riveted connection of the channel bearing
- Front and rear bolting to the frame
7.5 Push bar
- Check for general damage
- Folding in via the release button
- Angle adjustment of the upper part of the push bar via the ratchet joints
- Latching of the push bail in unfolded state
- Locking of the push bar in the unfolded state, bolt must release from
the lock when folded and lock in the rear frame joint when unfolded.
Check of the screw connections:
- Lower screw connection of the lower part of the push bar through the
push bar joint to the rear frame join
- Fastening of the release button
- Rivet connection of the ratchet joint
Summary of Contents for BINGO Evolution
