20
7. Maintenance schedule
7.1 Frame & base plates
Functional test:
- Check for general damage or deformation to the frame structure or
base plate.
Check of the screw connections:
- Connection of lintel adapter and base plate
- If applicable, screw connection for anti tipper or tip assist
- Front connecting screw frame and base plate
After loosening the four marked screw connections on the footrest bra-
cket, the footrest can be adjusted in depth.
This alters the location of the foot rest and, therefore, also the foot
rest angle. The further the footrest is pulled out to the front, the greater
the angle becomes. If the procedure is reversed, the angle decreases
accordingly.
7.2 Back base rigid
Functional test:
- Checking the appropriate seat settings
- Check for general damage in the area of the back base
6.6 Footrest angle and lower leg length
The footrest angle is preset to 90°. The adjustment range is +- 10° (80°
- 100°).
The lower leg length is realised by moving the footrest bracket vertically
on the tubes of the footrest hanger.
After loosening the wing screws on the back, the appropriate length can
be adjusted.
Afterwards, retighten the screws securely!
Summary of Contents for CLEO Teen
Page 1: ...en CLEO Teen Service instructions Partnerschaft f r mobile Kinder...
Page 33: ...33...
Page 34: ...34...
