20
The tilt is triggered by a locking pin pull, which is controlled by a release
lever on the push bar or push handle.
6.6 Back angle adjustment
The back angle adjustment on the SWINGBO 2 and 2XL depends on
the
selected push bar/push handle variant and the corresponding back.
A distinction must be made here:
Push bar/handles removable with back angle adjustable
The angle of the push handles themselves cannot be adjusted, but they
can be removed for small transport dimensions via clamping levers and
tripod springs.
Depending on how the back panel is screwed to the base, the
adjustment range is either 75°-115° or 80°-120°.
If the back plate is screwed in the positions shown on the left,
the adjustment range is 80°-120°.
If the backrest panel is screwed into the positions shown on the right
the adjustment range is 75°-115°.
The back itself offers a total adjustment range of 40° and can be
operated via the release strap on the back.
In addition, the back can be folded forwards for small transport
dimensions.
1. Push bar/handles removable with
angle adjustable back
2. Push bar/handles foldable with back in
trough shape
3. Angle-adjustable and foldable push
bar with trough-shaped backrest
The back sits here in front of the of the
push handles or the push bar and remains
unaffected by their function.
!
!
Summary of Contents for SWINGBO 2
Page 1: ...en SWINGBO 2 2XL Service instructions...
Page 6: ...6 2 Overview SWINGBO 2 2XL 1 2 4 5 6 7 8 9 3 11 10...
Page 39: ...39...
