background image

5

Extreme settings (e.g. shortest wheelbase and seat in the backmost position) combined 

with an unfavourable body posture can cause the wheelchair to tip even on level ground.

Static stability is >10,5° inclination.

Attaching heavy bags or other weight to the push handles can adversely affect stability.

Under no conditions should the anti-tip(s) assume the function of transport wheels, for 

example to transport a person in the wheelchair with the rear wheels removed. The anti-

tipper must audibly lock in place, before it is able to bear loads.

Firm seating must be verified by the user or by an attendant.

The 

SWINGBO Plus

 is only intended to carry one child at a time.

The maximum load for the 

SWINGBO Plus

 is 75 kg.

Accessories and add-ons reduce the maximum load proportionately.

Caution!
We recommend that, wherever and whenever possible, users transfer to the seats installed
in the motor vehicle and use the corresponding vehicle restraint systems, because this is
the only way to ensure optimum protection of the passengers in case of an accident.
Your 

SWINGBO Plus

 wheelchair is permitted for use as a seat in a motor vehicle.

Be careful in case of extreme temperatures. The wheelchair can heat up significantly when 

in the sun or in the sauna. In extreme cold, there is a risk of hypothermia.

Slowing down from high speeds or when descending longer slopes tends to heat up the 

hands and fingers, especially if using aluminium push rings. When using the wheelchair

outdoors, leather gloves should be worn. Gloves provide the wheelchair user with a better 

grip and protect his or her fingers from dirt and hot metal.

Always make sure that the quick-release axles are correctly set on the rear wheel. It must 

not be possible to remove the rear wheel unless the button on the quick-release axle is 

pushed

The assembly of a seat shell is only permitted within the specified seating area. 

The manufacturer of that new product combination has to test the stability and the adhe-

rence of the maximum load before commissioning. 

Whenever you change any settings on the wheelchair, make sure that you firmly tighten 

any screws that have been loosened.

Adjustments with a high active degree demand a practised driver and the use of an anti tip. 

Don´t use the footrest to get into and out of the wheelchair.

Neither seat nor backrest height may be exceeded.

Summary of Contents for SWINGBO Plus

































Reviews: