8
Turn the anti-tip to the left as shown in illustration 11.
(if the anti-tip is mounted on the left side turn it to the right side).
• The length of the anti-tip can be adjusted by using the three positions
on its locating tube (12).
• The anti-tip should be positioned so that the small wheel at the end
of anti-tipper tube projects beyond the radius of the rear wheels and
approximately 2-3 cm above the ground (12).
CAUTION!
By tipping the wheelchair carefully backwards onto the
anti-tippers, check that they are securely located.
If your
SWINGBO Plus
is supplied with
a detachable push-bar / push-
handle, please proceed as follows:
• Open the cam lever on both sides (13).
• Place the push bar / push-handle down into their locating brackets (14).
• Press in the spring button and slide the push bar / push-handle
downwards fully into its bracket, until it clicks into position (15).
11
12
13
14
15
