5
Step #4: On the back of each speaker cabinet, you will see pink wires that go to a
plug. Separate these plugs on each side of the bike noting they may still
be undone from when the speakers were installed. From the amp, take
the 2 pin plug with the blue/black wires and install it into the plug going
into the brake side speaker cabinet. Take the 2 pin plug with the brown/
black wires and install it into the plug going into the clutch side speaker
cabinet.
Step #5: From the amp’s input connector, take the 2 pin plug with the green/
black wires and install it into the mating plug on the brake side of the
bike. Also from amp’s input connector, take the 2 pin plug with the
yellow/black wires and install it into the mating plug on the clutch side
of the bike.
Fig 1.2. Single REV 225-RM amplifier correctly
positioned on mounting plate. The empty area to
the right is perfect if you want to add a second REV
225-RM later on to power speakers in saddle bag
lids or fairing lowers.
Summary of Contents for G4 SG KIT-RM
Page 1: ......