BA_PH_436-100_EN_44-21.docx
33
10.7
Warnings and Error Messages
10.7.1
Warnings
Warnings are signalled by a
“
Warning
”
pop-up window with a yellow background. The yellow highlighted warn-
ings appear as soon as the
“
Start
”
button is pressed during a pending problem:
Figure 27: Warning 1
Cause:
The protective cover is open. It is not possible to work with
an open protective cover!
Remedy:
Close the protective cover.
Figure 28: Warning 2
Cause:
The feed switch is in position
“
I
” (ON)
. The feed can only be
switched on when the cutter head has reached full speed
and the start/stop button stops flashing.
Remedy:
Switch off the feed switch.
Figure 29: Warning 3
Cause:
The machine brakes.
Remedy:
Please wait until the machine has stopped completely.
Figure 30: Warning 4
Cause:
The
“
Brake Release
”
selector switch is active.
Remedy:
Turn the selector switch to
“
inactive
”
position.
Error messages can be found on the following pages in section