background image

1.Safety

 

 

1

-

3

 

 

 

Safety outfit

 

 

 

When handling the machine, do not wear; 

 

loose clothes 

 

clothes with unbuttoned sleeves 

 

hanging tie or scarf 

 

accessories such as dangling jewelry 

Such outfit could be caught in the machine or dragged in the 

rotating portion of the machine which could cause a serious 

injury. 

 

                                                  TR0084 

 

 

 

 

 

 

 

Cautions of hose attachment and removal 

 

 

 

Piping or the hose from this machine service valve should use 

what can be borne enough for the discharge pressure of this 

machine. 

 

Please connect piping or a hose to this machine service valve 

firmly before operation and during operation. If the connection 

part is loosening, there is a possibility of piping or a hose 

separating and getting seriously injured. 

 

Please remove after closing a service valve and extracting 

pressure remained, in case piping or a hose is removed. If 

pressure remained should remain, a near thing blows away or 

there is a possibility of a hose whipping, causing a 

phenomenon and getting seriously injured. 

 

In order to use it safely, please read the handling of the work 

tools often used. 

 

 

 

 

 

 

Transportation 

 

 

 

When loading and unloading unit, be sure to use the lifting bail provided on the center of the unit top. 

 

Never get under the unit which is suspended, it is very dangerous. 

 

When unit is transferred or moved from a working site, be sure to place it on truck bed, and tie it down 

firmly. Also be sure to put a set of chocks to fix its wheels firmly in position. 

 

Never lift unit which is still in operation. It could cause critical damage to each component or lead to 

serious accident.

 

 

 

 

 

Installation 

 

 

 

The machine should be parked horizontally on a level place. 

 

In case the machine has to be parked on a slope, place it 

across grade so that the machine does not tend to roll 

downhill. 

 

 

Grade on a slope shall be within 15 degrees   

 

Be sure to put one set of chocks (1) to the wheels. 

 

                       A000054 

 

 

TR0088 

TR0088 

TR0303A 

Summary of Contents for Airman PDS100S-6B1

































































Reviews: