Black plate (35,1)
Holden Malibu Owner Manual (GMNA-Localizing-Holden-9272603) - 2015 -
CRC - 11/21/14
Driving and Operating
9-35
Towing and loading equipment
Tow load
Mandatory equipment
Up to 1,200 kg
Holden 1,200 kg rated tow bar
Holden trailer wiring harness
Brakes on the trailer if the aggregate trailer mass (ATM) is more than 750 kg
{
Warning
At no time may the total front or
rear axle load exceed the
maximums specified. See
“
Axle
loads
”
under
Towing precautions
.
When heavily loading the vehicle
or when towing, inflate tyres to
the maximum recommended
pressure. See
.
.
Tighten the tow ball retaining nut
to 140
Y
(Newton metres) and
check the torque frequently.
.
Vehicles handle differently when
towing. Take a couple of short
distance trips with the trailer
before taking a long trip.
.
Have the vehicle and trailer
correctly maintained and
serviced, with particular attention
given to the brakes, tyres,
suspension, wheel bearings,
towing coupling and lighting.
.
Use an extended-arm mirror on
both sides of the vehicle if
necessary.
.
Headlamps may need re-aiming
after the loaded trailer has been
hitched, particularly if a load
distribution hitch is not used.
.
Use a lower gear and the
brakes, when descending steep
hills.
.
At highway speeds it is
recommended that cruise control
be used. Cruise control prevents
the transmission from
unnecessarily changing gears,
particularly on gradients.
.
Do not use axle-mounted
hitches.
.
Ensure that the tow bar does not
obscure the rear number plate.
Remove the tow bar tongue
when not required for towing.