Black plate (15,1)
Holden Malibu Owner Manual (GMNA-Localizing-Holden-9272603) - 2015 -
CRC - 11/21/14
Keys, Doors, and Windows
2-15
Programming the Power
Windows
If the battery on the vehicle has
been recharged or disconnected,
or is not working, the driver power
window will need to be
reprogrammed for the express-up
feature to work. Replace or
recharge the vehicle battery before
reprogramming.
To program the driver window:
1. With the ignition in ACC/
ACCESSORY or ON/RUN,
or when in RAP, close all doors.
2. Press and hold the power
window switch until the window
is fully open.
3. Pull the power window switch up
until the window is fully closed.
4. Continue holding the switch up
for approximately 2 seconds
after the window is completely
closed.
The window is now reprogrammed.
Express Window Anti-Pinch
Feature
If any object is in the path of the
window when express-up is active,
the window stops at the obstruction
and auto-reverses to a preset
factory position. Weather conditions
such as severe icing may also
cause the window to auto-reverse.
The window returns to normal
operation once the obstruction or
condition is removed.
Express Window Anti-Pinch
Override
{
Warning
If express override is activated,
the window will not reverse
automatically. You or others could
be injured and the window could
be damaged. Before you use
express override, make sure that
all people and obstructions are
clear of the window path.
In an emergency, the anti-pinch
feature can be overridden in a
supervised mode. Hold the window
switch all the way up to the second
position. The window rises for as
long as the switch is held. Once the
switch is released, the express
mode is reactivated.
In this mode, the window can still
close on an object in its path. Use
care when using the override mode.
