background image

 

3

         

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the product.  

WARNING

To reduce the risk of electric shock or injury: 

  Do not plug in the unit before assembly. 

  Keep electric wires clear of being pinched or cut during assembly or installation. Discard sets with cut or   

damaged insulation. 

  For indoor and covered outdoor use only. 

   

RISK OF FIRE

 

Do not replace attachment plug. Do not remove the safety device (fuse). Discard product if the attachment plug is 
damaged.   

 

CAUTION 

 

To reduce the risk of overheating, replace burned-out bulbs promptly. Use 2.5 volt bulbs only. 

 

This lighting is rated 81.6 watts (0.68 amps). Do not overload. Connect other lighting string or decorative outfits end-
to-end up to a maximum of 216 watts (1.8 amps) total.  
If connecting to a lighting string that does not have a Wattage (W) rating

found on the tag within 6 inches of the 

plug

calculate the wattage as follows: Multiply the current (0.68 A) which is on the flag-type tag by 120. 

For example: Lighting string is rated 120V, 60Hz, 0.68Amps. 0.68 × 120 = 81.6 Watts 
Add the wattage of each light string together for a total of 216 Watts or less. (Do not exceed 216 Watts) 
 

When using electrical products, basic precautions should always be followed including the following: 

READ AND FOLLOW ALL SAFETY INSTRUCTIONS 

 

Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are 
used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not 
provided, contact a qualified electrician for proper installation. 

 

This seasonal-use product is not intended for permanent installation or use. 

 

Do not mount or place near gas or electric heaters, fireplace, candles or other similar sources of heat. 

 

Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails. 

 

Do not let lamps rest on the supply cord or on any wire. 

 

Unplug the product when leaving the house, when retiring for the night, or if left unattended. 

 

This is an electric product – not a toy! To avoid risk of fire, burns, personal injury and electric shock it should not 
be played with or placed where small children can reach it. 

 

Do not use this product for other than its intended use. 

 

Do not hang ornaments or other objects from cord, wire or light string. 

 

Do not close doors or windows on the product or extension cords as this may damage the wire insulation. 

 

Do not cover the product with cloth, paper or any material not part of the product when in use. 

 

This product is equipped with push-in type bulbs. Do not twist bulb. 

 

This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the 
fuse blows, unplug the product from the outlet. Also unplug any additional strings or products that may be 
attached to the product. Replace the fuse as per the User Servicing Instructions (follow product marking for proper 
fuse rating) and check the product. If the replacement fuse blows, a short-circuit may be present and the product 
should be discarded. 

 

Read and follow all instructions that are on the product or provided with the product. 

SAVE THESE INSTRUCTIONS

 

 

Lowes.com 

Summary of Contents for W14F0789









Reviews: