5
2
1
3
6
5
4
aps.
5. Shape and shift tree branches to fill in any g
Insert the red-label plugs into red-label extension cord
and insert the plug of the green label extension cord
(5) into a wall outlet.
5
• Before using or reusing, inspect product carefully. Discard any products that have cut, damaged or
frayed wire insulation or cords, cracks in the lamp holders or enclosures, loose connections,
or exposed copper wire.
• When storing the product, carefully remove the product from wherever it is placed, including trees,
branches, or bushes, to avoid any undue strain or stress on the product conductors, connections
and wires.
• When not in use, store neatly in a cool, dry location protected from sunlight.
BULB REPLACEMENT INSTRUCTIONS:
1. Grasp plug and remove from the receptacle or other outlet device.
Do not unplug by pulling on cord.
2. Lift up to unsnap locking tab; then pull lamp and plastic base straight
out of lamp holder.
3. Replace lamp with only 2.5-volt push-in type lamp provided with product.
FUSE REPLACEMENT INSTRUCTIONS:
1. Grasp the power cord plug and remove from the receptacle or other
outlet device. Do not unplug by pulling on cord.
2. Open fuse cover by sliding open the fuse access cover on top of
attachment plug toward blades.
3. Remove fuse carefully: turn fuse holder over, remove fuse.
4. Risk of fire. Replace fuse only with 3-amp, 125-volt fuse for decorative
lighting string(provided with product). If applicable, replace fuse only with
5A-amp, 7A-amp or 10-amp, 125-volt fuse for cord-set (see fuse current
on cord-set plug).
5. Close fuse cover by sliding closed the fuse access cover on top of
attachment plug.
CARE AND MAINTENANCE
Grip plastic
not glass
Do not twist lamp
Pull straight out
Push straight in!
Remove lamp base
Replace lamp base
Lowes.com
Burned fuse
