5
CARE AND MAINTENANCE
Grip plastic
not glass
Pull straight out
Remove lamp base
Replace lamp base
Burned fuse
1. Grasp plug and remove from the receptacle or other outlet device.
Do not unplug by pulling on cord.
out of lamp holder.
FUSE REPLACEMENT INSTRUCTIONS:
BULB REPLACEMENT INSTRUCTIONS:
FUSED LAMP REPLACEMENT
WARNING -
Risk of fire: This product employs overload protection (fuse lamp) in
each series light circuit to provide overload protection in addition to the fuse(s)
located in the plug. Do not replace the fuse lamp contained in this set with any
other type of lamp, use only spare fuse lamps provided with this product. In case
of a burnt out FUSED lamp, the entire series of 50 lamps will be out. To replace
the fused lamp:
5.
Shape and shift tree branches to fill in any gaps.
Plug in the power cord (5) to any 120V outlet. Press the pedal
switch (6) to turn on the tree lights.
5
2
1
3
6
5
4
• Unplug extension cord from the wall outlet first and then remove all ornaments and decorations.
• Disassemble the tree from the top to the bottom. Start with the tree top and gently lift straight up to
remove from section below and fold all branches toward the pole.
• Continue by gently lifting straight up each section(s) from the section below
and fold all branches toward the pole until the bottom section is removed from
the tree stand. Cover the protective cap on the poles to avoid damaging the
internal parts.
(See Fig. A)
• Carefully place all tree sections into shipping box and tape it shut.
• When not in use, please store your tree in a cool, dry place away from sunlight.
Exposing your tree to excessive heat or humidity may damage your tree.
Fig. A
Lowes.com
1. Grasp plug and remove from the receptacle or other outlet device.
Do not unplug by pulling on cord.
2. Open fuse cover by sliding open the fuse access cover on top of
attachment plug towad blades.
3. Remove fuse carefully: turn fuse holder over, remove fuse.
4. Risk of fire. Replace fuse only with 3-amp, 125-volt fuse for decorative
lighting string(provided with product). If applicable, replace fuse only
with 5A-amp, 7A-amp or 10-amp, 125-volt fuse for cord-set(see fuse
current on cord-set plug).
5. Close fuse cover by sliding closed the fuse access cover on top of
attachment plug.
