HLP-NV Series
HLP-NV Series
-
41
-
0-2* Motor Data
●
Function:
Enter the correct motor nameplate data (power, voltage,
frequency, current and speed).
Run AMT, see par. C01.29. Default setting settings for advanced motor
data, par. C01.3*, are automatically calculated.
●
ATTENTION!
Parameters in parameter group 1.2* cannot be adjusted
while motor runs.
C01.20 Motor Power [kW] [HP]
Default setting
**
Range
[0.09 kW/0.12 HP -11 kW/15 HP]
Two sizes down, one size up from nominal VLT rating.
●
Function
:
Enter motor power from nameplate data.
C01.22 Motor Voltage
Default setting
**
Range
[50.0 - 999.0 V]
●
Function
:
Enter motor voltage from nameplate data.
C01.23 Motor Frequency
Default setting
50
Range
[20-400 Hz]
●
Function
:
Enter motor frequency from nameplate data.
●
ATTENTION!
Changing this parameter affects motor nominal speed
set in par. C01.25.
C01.24 Motor Current
Default setting
**
Range
[0.01 - 26.00 A]
●
Function
:
Enter motor current from nameplate data.
C01.25 Motor Nominal Speed
Default setting
**
Range
[100 - 9999 RPM]
●
Function
:
Enter motor nominal speed from nameplate data.
●
ATTENTION!
If Motor Frequency has been changed in par. C01.23,
Nominal Motor Speed is affected.
