HL-190 D25 4WD/P/N / HL-220 D25 4WD/P/N
B-165DL25 4WD/P/N / B-195DL25 4WD/P/N
Rev. A
5/2/18
Page 35
7
Transport
7.1
Towing
7.1.1
Introduction
The scissor lift has a multiple disc brake with a towing function, which allows the scissor lift to be
towed. The multiple disc brake is applied when the scissor lift is stationary. The multiple disc brake
must be released before the scissor lift can be towed.
7.1.2
Releasing the multiple disc brakes
Unscrew the bolt (1) (key width 30 mm) until the stop can be felt (approx. 14 mm).
Repeat this for the other wheels. The scissor lift can now be towed. The wheels can now no
longer be braked.
Bolt for the multiple disc brake
Warning
Prevent the scissor lift from being able to roll away. For example, place chocks against the
wheels.
Note!
Do not continue rotating past the towing stop.
Warning
Reset the brakes for all the wheels after towing the scissor lift.
