HL-190 D25 4WD/P/N / HL-220 D25 4WD/P/N
B-165DL25 4WD/P/N / B-195DL25 4WD/P/N
Rev. A
5/2/18
Page 7
The maximum height (m).
The maximum height when mobile.
The minimum permissible temperature (° C).
The maximum operating pressure (bar).
1.7
Delivery conditions and warranty
1.7.1
Delivery conditions
HOLLAND LIFT INTERNATIONAL B.V.
delivers products in accordance with the delivery and
payment conditions issued by the Metaalunie, dated 1st January 2008.
1.7.2
Warranty
For the warranty period, see the delivery conditions.
1.8
Intended use and modifications
1.8.1
Intended use
The scissor lift is only intended to be used to allow people to work at a height. The platform’s
maximum load (see type plate) must not be exceeded under any circumstances. Any other use is
contrary to the scissor lift’s intended use.
1.8.2
Modifications
Modifications to the scissor may only be made lift after written permission has been given by the
management of
HOLLAND LIFT INTERNATIONAL B.V.
The information contained in this instruction manual is based on information regarding
constructions, material properties and work methods known by us at the time of publication. We,
therefore, reserve the right to make construction alterations. For this reason,
HOLLAND LIFT
INTERNATIONAL B.V.
also reserves the right to make alterations to the content of the instruction
manual without the need to give prior notification.
Components may only be replaced by components provided by
HOLLAND LIFT INTERNATIONAL
B.V.
or components which can be considered to be of an equal quality.
HOLLAND LIFT
INTERNATIONAL B.V.
reserves the right to decide whether these components are of an equal
quality. The manufacturer can only be held liable if a written declaration stating that the components
are of an equal quality has been received from the manufacturer.
