17
XL-LG20004UM-en-US Rev B · 2018-09-17 · Amendments and Errors Reserved · © SAF-HOLLAND, Inc., SAF-HOLLAND, HOLLAND, SAF,
and logos are trademarks of SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.
Troubleshooting
Figure 29
Figure 28
SQUARE
CORRECT
SQUARE
SQUARE
TRAILER SIDE VIEW
TRAILER END VIEW
SLIGHTLY ANGLED
RETRACT TUBE IS
PERMISSIBLE
8.5 Landing Gear Alignment
Check to make sure the landing gear legs are in alignment with
the trailer and parallel with each other using a square
(Figure 28)
.
Bent or damaged legs are an indication of possible damage to
the lift screw, lift nut or other internal components and should
be replaced.
NOTE:
Atlas 55, 65 and iM landing gear utilize a floating nut
retract tube design. A retract tube that appears to
be angled slightly compared to the upper housing
DOES NOT constitute a damaged leg
(Figure 29)
.
However, if the landing gear housing shows signs
of fracture or cracking around the band area, the
landing gear must be replaced.
