3
1. Front wheel assembly
Turn over the car body, insert a washer and the front wheel to
front axle, fix with washer, cotter pin and wheel cover.
2. Rear wheel assembly
a.First, check whether the rear axle is in the middle of the car,
make sure the axle length that extend out on both sides are
same.
b. Attach the rear wheel to the rear axle and motor , fixed with
washer, cotter pin and wheel cover.
c. Turn over the car body, make sure that the assembled wheel
is contact with the ground, pull out the rear axle until it can’t
move, then assembly another wheel.
