3
1. Shock absorber and rear axle assembly
Use knife or scissor to cut off the cable tie on the rear of
the car body, separate the upper and lower parts. Use
provided wrench tool to remove the screw and lock nut
from the shock absorber, align shock absorber with iron
loops on the car body, then insert the screw and
secure with lock nut. Remove the nuts and washer from
rear axle and insert the axle, make sure each side has
equal clearance for the both of the rear wheels. Keep the
nuts and washers for later use.
Screw
Lock nut
Rear axle
Shock
absorber
Iron loop
