ITALIANO
- 3
1.1 INTRODUZIONE
PERICOLO:
Prima di utilizzare l’apparecchio leggere at-
tentamente il libretto
“AVVERTENZE DI SI-
CUREZZA PER MONOSPAZZOLE”
allegato
al presente.
Il presente manuale costituisce parte integran-
te della macchina stessa; deve essere pertan-
to conservato con cura in un luogo sicuro e
accessibile a tutti gli utilizzatori (operatori e
personale addetto alla manutenzione) per tut-
ta la vita della macchina fino alla demolizione.
1.2 - USO PREVISTO DELLA
MACCHINA
AVVERTENZA:
Questa macchina è destinata per il solo
uso interno.
PERICOLO:
Qualsiasi altro utilizzo solleva il costrut-
tore da responsabilità per danni a perso-
ne e/o cose e fa decadere qualsiasi condi-
zione di garanzia.
Questa macchina è destinata all’uso com-
merciale, per esempio in alberghi, scuole,
ospedali, fabbriche, negozi, uffici e attività di
noleggio.
La macchina è stata progettata e costruita:
per un uso professionale, per il lavaggio di
pavimenti e moquette, per la lucidatura di
pavimenti, per la levigatura di pavimenti (ad
esempio parquet e superfici sconnesse).
1.3 - USO NON PREVISTO
DELLA MACCHINA
AVVERTENZA:
La macchina non è destinata a funzionare
all’aperto.
PERICOLO:
- non lavare pavimenti con acqua superio-
re a 50°C;
- non utilizzare gasolio/benzine o detergen-
ti corrosivi per il lavaggio di pavimenti;
- non lavare e aspirare liquidi corrosivi, in-
fiammabili, esplosivi anche se diluiti.
2.1 ASSEMBLAGGIO
COMPONENTI
2.1.a - Posizionamento maniglione
(Fig. 1)
- Posizionare il maniglione (1) sulla base
(2) facendo combaciare i quattro fori del
maniglione con i fori del corpo macchina.
- Avvitare le viti (3) in dotazione.
2.1.b - Collegamento elettrico
maniglione-corpo macchina
(Fig. 2)
- Collegare elettricamente il maniglione al
corpo macchina inserendo la presa (7)
nella spina (8) della macchina;
Interporre la guarnizione (9) prima di col-
legare la spina e avvitare le viti (10) in
dotazione.
2.1.c - Montaggio supporti avvolgi-
cavo (Figg. 3/5)
Alcuni modelli sono dotati di supporti avvolgi-
cavo che vanno montati direttamente sull’a-
sta del maniglione:
- Incastrare l’innesto corto (11) nell’innesto
lungo (12) (Fig. 3).
- Avvitare la vite (13) al pomello (14) mante-
nendo quest’ultimo verso destra (Fig. 4).
- Il gancio (15) del supporto può essere
ruotato a seconda dell’utilizzo (Fig. 5).
- Posizionare un supporto nella parte su-
periore del maniglione e un secondo sup-
porto in quella inferiore.
Manuale HU30-923_HOLLU_EM143 EM143 DS_1ed_07-2019.indd 3
16/07/2019 08:11:20
Summary of Contents for EM 143
