ARCHITECTURAL & LANDSCAPE LIGHTING
|
holmlighting.com
A Hunter Industries Company
INSTALLATION NOTES:
d
Crest
-
13
1. Caution and Safety Instructions
•
Qualified personnel must install and/or service
product in a manner consistent with its intended
use and in compliance with the National
Electrical Code, Canadian Electrical Code, and/
or all local and provincial codes.
•
Follow all product label information and
installation instructions.
•
Turn off power at fuse or circuit breaker before
installation or servicing.
•
The use of damaged components may cause an
unsafe condition and void product warranty.
•
Do not block light emanating from product in
whole or part.
•
Never operate the fixture with missing or
damaged lens. Clean lens on a regular basis.
•
Entire fixture may become extremely hot. Do
not touch hot lens or fixture body. Do not touch
the light source at any time.
•
Keep all O-rings and sealing surfaces clean
during installation and servicing; failure to do
this may lead to premature failure of the
product.
2. Product Information
•
Suitable for mounting within 1.2 meter (4 feet) off the ground.
3YJ8
11.5"/29
.3
c
m
5.0"/12.7
c
m
11.6"/29
.5 cm
Tools Needed:
•
3/16
"
Allen wrench (installation)
•
9/64
"
Allen wrench (servicing)
•
#1 Phillips screwdriver (servicing)
•
#2 Philips screwdriver (servicing)
1/2-14 NPSM
