12
Other Features
Stop
To stop an automatic or manual watering schedule,
turn
the dial to the
Off
position.
Stacking Start Times
Should you accidently set the same watering start time on more than
one program, the controller will stack them in sequential order from
the lowest number. All the programmed start times will be watered,
but the start times will be shunted along.
Automatic Back Up Program
When the battery is not fitted or is flat during a power outage, The
automatic program will be retained in a permanant memory chip. Also
the clock time will be retained in the memory at the time of the outage.
A standard 9 volt alkaline block battery should be fitted to the battery
snap supplied to maintain the clock accuracy and hold the automatic
programs during power outs.
Manual Operations (cont.)
Run A Start
To manually run a complete start once for the run times as set in the
automatic schedule,
turn
the dial to the
Run a Start
position. “Start 1” will be
shown in the display. To run start 1, leave, or advance to start 2 by
pressing
.
The display has a warning indicator to let you know when the
battery is low or not fitted. The word
BAT
is displayed under
the AM / PM indicator in the clock mode.
TIP
For automatic watering, remember to
turn
the dial back
to the
Auto Run
position. The
Off
position will stop any
watering from occuring.
TIP
DialEZY Controller 4 & 6 Station Instruction Manual Rev03.indd 12
10/06/2016 11:28 AM