17
Installation Instructions
Power Supply Connections
The controller itself can run off a 240V AC to 24V AC external
transformer. It is recommended that the transformer is not connected
to a 240V AC supply which is also servicing or supplying motors.
(i.e. Air conditioners, pool pumps, refrigerators, etc.)
Lighting circuits are suitable as a power source.
Connections to the unit are as follows:
Valve wires can enter the controller through rear.
Connection Of Valves
Up to two 24VAC Solenoid Valves can be connected to each station
output and wired back to the common (COM) thus:
DialEZY Controller 4 & 6 Station Instruction Manual Rev03.indd 17
10/06/2016 11:28 AM