3
Introduction
The key elements when programming your controller are:
1. Grouping the stations.
(valves)
Group together garden areas which have similiar watering
requirements. Examples are: Turf Areas, Flower Beds, Pergola/
Undercover Areas, or Vegetables. These different groups require
individual settings (programs).
2. Planning out your watering program.
Complete your individual watering planner, supplied at the back of
this book.
3. Setting the current time and correct day of the week.
4. Setting an automatic program.
Use the following 3 steps to set each group.
4.1 Set Start(s).
This sets the time of the day when the watering program will
commence.
4.2 Set Watering Days.
These are the nominated days when the automatic system will
be active.
4.3 Set Station Run Times.
This sets the watering duration required for each station (valve).
Programming Instructions
This controller has been designed with four separate starts
(programming schedules), to allow different garden areas to have their
own individual watering requirements.
A program is basically a method of grouping stations (valves) with
similar watering requirements to water on the same days. These
stations will water in sequential order from the lowest number at the
start time (or times) nominated and on the days selected. The stations
can have different durations.
DialEZY Controller 4 & 6 Station Instruction Manual Rev03.indd 3
10/06/2016 11:28 AM
