7
Programming
Each start time can be programmed individually to suit your watering
requirements
STEP 1. Set Start Times
All valves will activate in sequential order for each start time. Turn the
dial to
Set Start Times
.
The display will show:
“Start 1” will flash.
Press
& the “hour” will flash. Use
or
to adjust.
Note:
AM / PM is set correctly.
Press
& the “minutes” will flash. Use
or
to adjust, if
required.
To turn an active start time off, turn the dial to the
Set Start
times
position,
Select
the start number required using the
button and then
press
until the “hour” is flashing.
Use
or
until “OFF” is shown.
“OFF” position is between 12 and 11pm.
TIP
TIP
Setting Start
TIP
To return to the clock,
press
,
or
turn
dial to another position.
DialEZY Controller 4 & 6 Station Instruction Manual Rev03.indd 7
10/06/2016 11:28 AM