background image

4

GENERAL INSTALLATION DATA

  

CAUTION

 This equipment is designed and sold for commercial use only by personnel trained and 

experienced in its operation and is not sold for consumer use in and around the home nor 
for use directly by the general public in food service locations.

 Before using your new equipment, read and understand all the instructions & labels 

associated with the unit prior to putting it into operation.  Make sure all people associated 
with its use understand the units operation & safety before they use the unit.

 All shipping containers should be checked for freight damage both visible and concealed.  

This unit has been tested and carefully packaged to insure delivery of your unit in perfect 
condition.  If equipment is received in damaged condition, either apparent or concealed, a 
claim must be made with the delivering carrier.

 Concealed damage or loss - if damage or loss is not apparent until after equipment is 

unpacked, a request for inspection of concealed damage must be made with carrier within 
15 days.  Be certain to retain all contents plus external and internal packaging materials for 
inspection.  The carrier will make an inspection and will supply necessary claim forms.

INSPECTION & ASSEMBLY 

UNCRATING AND INSPECTING

 Unpack the unit and components from the shipping container.  Remove all visible packing 

material and those from inside the cooking chamber.  If damage is discovered, 

fi

 le a claim 

immediately with the carrier that handled the shipment.  Do not operate the unit if it was 
damaged during shipping.

ASSEMBLY AND INSTALLATION

 The unit was shipped fully assembled and ready to plug into a standard outlet speci

fi

 ed for 

its voltage and amp draw.  If improper electrical supply is determined, contact a quali

fi

 ed 

electrician prior to using the unit.  Removal and replacement of the power cord and plug will 
void the warranty.  For assistance, contact your local authorized service agent for service or 
required maintenance.

 Level unit using the adjustable feet under the unit (approximately 1/2" adjustment).

 Before using the unit for the 

fi

 rst time, wipe down the exterior with a damp cloth.

  

CAUTION

Allow enough space around the toaster for adequate ventilation.  Do not operate the unit 

without the crumb tray properly positioned.  Overheating and poor toasting may occur.  
Read all labels on the unit and follow their instructions.

ELECTRICAL CONNECTION

  

WARNING

 Before making any electrical connection to this unit, check that the power supply is 

adequate for the voltage, amperage and requirements stated on the rating plate.  
A wiring diagram is included herewith.  
Never plug a 208V unit into 240V or 240V unit into a 208V.

 Disconnect the unit from the power source before installing or removing any parts.
 Be absolutely sure that the ground connection for the receptacle is properly wired.  Do not 

connect equipment to power without proper ground connections.  Improper grounding may 
result in personal injury or fatality.

Summary of Contents for QCSe-2 SERIES





















Reviews: