8
CLEANING
Preventive maintenance for your Holman toaster consists of the following recommended
cleaning procedures. To keep your toaster in its top operating condition, these steps should
be performed on a daily or weekly as indicated.
A.
Clean air intake on bottom of unit, and making sure it is free from any obstruction.
B.
For lightly soiled conveyor belts, turn conveyor speed control to fastest setting (100) and
wipe with a damp cloth (daily) For heavily soiled conveyors, turn conveyor speed control
to fastest setting and wipe with a light abrasive pad (as needed). Wipe conveyor with
damp
cloth.
C.
Turn main power saver switch to the OFF position. Disconnect unit from power source.
D.
After the unit cools, remove interior crumb tray (as shown below) and clean. Slide crumb
tray back into position.
E.
Wipe exterior surface of unit.
CLEAN
OPERATE
CRUMB TRAY REMOVAL
WARNING
DO NOT IMMERSE OR LET THE UNIT STAND IN WATER.
DO NOT HOSE DOWN THE UNIT OR THE TABLE/COUNTER IF THE UNIT IS ON
THE TABLE/COUNTER.
KEEP AWAY FROM RUNNING WATER.
Summary of Contents for QCSe-2 SERIES
Page 19: ......
