background image

 

1

All rights reserved.  You are prohibited from copying or reproducing this manual, any 
materials contained herein or any portion hereof in any manner whatsoever without the 
express prior written consent of Holmatro. 
 
 

Holmatro reserves the right to change the contents of this manual at any time 

without prior notice.  Holmatro also reserves the right to change any part or component of 
any machine referenced in this manual at any time without prior notice. 
 
 

This manual is intended for use solely with the basic version of each piece of 

equipment and each product referenced and should not be used in connection with any 
modified, altered or adapted version of any piece of equipment without the express prior 
written consent of Holmatro. 
 
 

Additional information on adjustments, maintenance and repair of any product 

contained herein will be provided upon written request of the technical department of 
your supplier.  If not provided, contact Holmatro directly. 
 

 

EXCEPT AS EXPRESSLY SET FORTH ON THE ENCLOSED 

WARRANTY CARD, HOLMATRO MAKES NO OTHER WARRANTY OR 
REPRESENTATION, EITHER EXPRESS OR IMPLIED, WITH RESPECT TO 
THE STATEMENTS CONTAINED HEREIN.  HOLMATRO HEREBY 
EXCLUDES ANY AND ALL IMPLIED WARRANTIES, INCLUDING 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 
PURPOSE. 
 
 

IN NO EVENT WILL HOLMATRO BE LIABLE FOR DIRECT, 

INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES 
ARISING OUT OF USE OF THIS MANUAL OR ANY STATEMENTS 
CONTAINED THEREIN. 
 
 

SOME STATES DO NOT ALLOW THE EXCLUSION OF IMPLIED 

WARRANTIES OR LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL 
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT 
APPLY TO YOU. 
 
IF ANY PROVISION CONTAINED HEREIN SHALL BE UNLAWFUL, VOID 
OR FOR ANY REASON UNENFORCEABLE, THEN THAT PROVISION SHALL 
BE SEVERED FROM THE STATEMENT AND SHALL NOT EFFECT THE 
VALIDITY AND ENFORCEABILITY OF THE REMAINING STATEMENTS 
CONTAINED HEREIN.

 

 
 
 

 

1.  Introduction

 

Summary of Contents for PPU 15

















Reviews: