4
© HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 5/4/06
HOLMS INDUSTRI AB
MOTALA SWEDEN
SAHL-L
630
720
370
Picture 2. Sketch to scale DIN-plate size 3
Generally about
the sweeper
The sweeper SAHL-L is a further development of SAHL
adapted to front mounting on wheel loaders. The
attachment bracket of SAHL-L is DIN standard (see
picture) but can be equipped with adapter for other
brackets.
SAHL-L operates with two direct acting hydraulic motors
designed for an oil flow of 70-200 l/min.
The suspension of the Sweeper gives a con-stant and
evenly applied pressure against the ground. This gives
minimal brush wear and insensitiveness to unevenness,
grooves, kerb stones etc.
The Sweeper can be equipped with hydraulic and
mechanical a - 30°.
Extra equipment
• Water sprinkling system with ramp and pump.
• Electrically operated selector valve for hydraulic angling
during sweeping. The carrier needs only one hydraulic
function.
• Side shift, gives the possibility to move the sweeper
hydraul - 0,7m.
• Different types of brushes, conventional or
tufted, steel or polypropylene (plastic).
Do not make any modifications, changes, rebuilt work etc. which are
not approved by Holms Industri AB. We also ask you to pay attention
to spare parts not approved by us.
Distribution block
El. selector valve
Picture 3. El. hydraulic bevelling
