e-mail: customerservice@holtkoetter.com
www.holtkoetter.com
ASSEMBLY INSTRUCTIONS FOR
Major lamp parts manufactured in Germany by Holtkötter Leuchten GmbH.
Bulbs manufactured in Germany by Osram GmbH. Final assembly by Holtkötter in South Saint Paul, MN.
Holtkötter
®
and Holtkötter Leuchten
®
are registered trademarks of Holtkötter. All Rights Reserved.
© Holtkötter
Halogen Floor Globe
No. 6560
Please make sure the following parts are included:
1. Lamp Base (A)
2. Bulb (B): 100 Watt Bayonet Base Halogen Bulb by Osram
(Order Code: 9250*100-DC/CL)
3. Glass Shade (C)
4. Foot Dimmer
Install the Bulb and Glass Shade
1. Install the new bulb, being careful not to touch the bulb envelope
with your bare hands. Hold the bulb at the porcelain grip, push it
down slightly and turn it clockwise.
2. Once the bulb is installed, place the threaded end of the glass
over the bulb and onto the socket.
3. Screw the glass shade down on the fixture until it is firmly in place.
4. Your lamp is now operational.
Note of Caution
The recommended replacement bulb for this fixture is the 100 Watt Osram Bayonet Base Halogen
bulb. Use of other brands of unknown quality may cause a risk of overheating.
B
C
A
