HOLTKÖTTER
INTERNATIONAL, INC.
www.holtkoetter.com
e-mail: customerservice@holtkoetter.com
ASSEMBLY INSTRUCTIONS FOR
Halogen Table Lamp 11209/1
Major lamp parts manufactured in Germany by Asmuth Leuchten GmbH. Bulbs manufactured in Germany by Osram GmbH. Final assembly by Holtkötter International, Inc. in South St. Paul, MN.
Holtkötter
®
& Holtkötter Leuchten
®
are registered trade-
marks of Holtkötter International, Inc. All Rights Reserved.
© Holtkötter International, Inc.
Bulb Replacement Instructions
1.
Loosen the set screw (Diagram I) of the glass-shield
holder.
2.
Push the glass-shield holder and the glass shield as far as
possible to the side. Push the ceramic socket in the
direction of the arrow and remove the old bulb
(Diagram II).
3.
With the glass shield in place, insert the new bulb
(through the glass shield) into the left socket. Push the
spring-loaded ceramic socket on the right side in the
direction of the arrow to install the new bulb.
4.
Finally, position the glass shield in the glass shield holders
and tighten the set screws in place.
Diagram I
Diagram II
