HOLUX FunTrek 130 Pro
70
Select “Sensor” to enter the sensor settings menu.
Select “Altimeter” to view the option of altimeter calibration mode. You can select
“GPS” or “Manual” calibration.
If "Adopt GPS Altimeter" is selected, a confirmation message will appear on the
screen.
If you choose manual calibration, enter the current altitude. The initial value that
appears on the keypad can be used as reference for the current altitude data.
Screen
When you touch the screen, you can adjust the screen calibration if there is a difference
on the response location.
Step:
On the main menu page, click Settings.
Select “Sensor” to enter the sensor settings menu.
Select “Screen”, a confirmation message will appear on the screen. Press the
confirmation button, and start to calibrate screen.
After calibrating the screen, tap the screen or wait for 30 seconds to exit.
