-25-
-26-
12.0 REPLACE THE PROPELLER
B
B
A
A
As shown above, use a screwdriver to remove the Screws in the
middle of the Blade Fixed Cover, remove the Propeller that needs
replacing from the motor shaft
(Pic.1)
. Finally, install the spare
propeller on the motor shaft.
When installing, please pay attention to distinguish the letter
“A”
and
“B”
printed on the propeller, make sure that all the propellers
are installed in the correct position
(Pic 2)
. If the wrong installation,
the drone will not be able to take off.
Do not take photos during the recording, which will
interrupt the recording.
①
Take Photo:
Short press the Photo / Video button on the
transmitter to take pictures. When one beep is heard from the
transmitter, this indicates the camera has successfully taken a
picture.
②
Record Video:
Long press the Photo / Video button on the
transmitter, 2 beeps from the transmitter will be heard. This tells you
that the camera has started recording video. By pressing the Photo
/ Video button again, 2 beeps from the transmitter indicates to exit
recording.
11.8 Take Photo / Video
Pic.1
Pic.2
Blade Fixed Cover
Screws
Propeller