-09-
•Return to Home (RTH)
Short press the button to start the RTH, the transmitter makes a beep
sound and the drone will fly back to the recorded Home Point.
Short press the RTH button again to exit RTH procedure and regain
control of the drone.
•Photo/Video
•Speed Switch
Long press the button “ ” in the upper right corner, the LCD screen
showing “ ”, and you will hear a beep, which means the drone is at the
low speed.
Long press the button “ ” again, the LCD screen showing “ ”, and you
will hear two beeps, which means the drone is at the high speed.
•GPS Mode Switch
•Emergency Stop
Short press the button and the camera icon “ ” on the LCD screen
flashes once, the camera takes one photo.
Long press the same button, the video icon “ ” on the LCD screen
flashes slowly
the camera is
taking video. Long press the button again
will stop video recording.
After turning on the transmitter, the GPS Mode is default on. GPS Mode can
be turn off by sliding GPS switch. Check the icon “ ” or “ ”on the LCD
screen to confirm GPS status.
Press and hold the button ” “ for 3 seconds, the motors will stop immedi-
ately. The range of the Emergency Stop is limited to a height of 16 feet and
a distance of 49 feet.
Attention:
The Emergency Stop function should only be use during
emergency to avoid any damage or injury. Be aware that you risk breakage
of the drone if it falls a large distance or hits anything at a high rate of speed.
