-21-
9.5 Calibrating the Compass
Step 1:
As shown in the figure above, push both of the joysticks down to the
bottom right at the same time to enter the compass calibration.
HEAD
9.4 Initialization Detection
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
First use
Non-first use
Place the drone on the level surface and it will enter the Initialization
Detection. The yellow, green and red light of the drone will alternate
flickering for about
25 seconds
to complete the initial detection. When the
transmitter sends out “Di Di”, the drone can be divided into two states:
·
First use:
The indicator light turns yellow and blinks.
·
Non-first use:
The indicator light changes to yellow (green) on.
25S
