16
Schematic diagram of the connection
of the motors and the PCB
It is important that the installation of the PCB and the wire connection
of the motor to the PCB should be connected properly according to the
diagram shown as below.
Altitude-Hold Function
The model is designed with Altitude-Hold function so that the quad
can stay at the current altitude when you release the throttle stick.
A KEY BACK:
When the model is flying in headless mode, press A Key Back button,
the model will fly back to player. Press the A Key Back button again
or operate the forward /backward control stick, the model will exit the
A Key Back function but headless mode is still active.
Remarks:
●Recalibration of the Gyro is needed when the model is ready to fly in
headless mode. When checking up on the flight direction, the model
should be set the head right ahead and the tail face the player; the
player should face the direction where the head of the model points at.
Player should keep the remote contorl face the same direction when
playing the model.
●
When the model is flying in headless mode, if the flight direction is
inconsistent with the player’s operating direction or there’s direction
deviation, please stop playing and recalibrate the Gyro.
