17
+ -
+ -
+ -
+ -
1
2
3
4
Camera Interface
Motor 1
Motor 2
Motor 3
Motor 4
1.Motor 1 should be connected with interface 1.
2.Motor 2 should be connected with interface 2.
3.Motor 3 should be connected with interface 3.
4.Motor 4 should be connected with interface 4.
Receiver
board
4.Connect the motor
wire of the new
motor to the power
wire plug.
5.Install the motor
into the main
body of the model.
6.Lock the motor
house with the
screw.
Installed with #C4016 camera, the model can take photos and videos.
Download and install the FPV App with the smart phone to use the
FPV camera functions.
FPV camera #C4016 installation
1.Take out the screws
with a screwdriver
by turning counter
clockwise.
2.Pull out the motor.
3.Unplug the motor
wire from the
power wire plug.
How to replace the motor
Pic.11
Pic.12
Pic.13
Pic.14
Pic.15
Pic.16