[Type here]
[Type here]
P a g e
|
23
KOPIS 1
Set Up Arming Switch
For safety, your KOPIS will not allow the motors to spin unless the quadcopter is
armed
. The preferred
way to arm a quadcopter is using a switch on your transmitter. To do this, you will need at least five
channels on your transmitter. Fortunately, most transmitters today have six or more channels.
There are two steps to setting up your arming switch. First, you must set up your transmitter. Second,
you must set up Betaflight.
Set up Aux Switch on Taranis
1.
Press MENU, then press PAGE four times until you see the MIXER screen.
2.
Scroll down to CH5.
3.
Press ENTER to create a new mix.
4.
In the new mix screen, scroll down to highlight the Source line.
5.
Press ENTER one time. The Source parameter will flash.
6.
Flick the switch that you want to use for arming one time. The Source parameter will change to
read that switch label. We suggest using switch SF, the large two-position switch on the upper-
left shoulder of the Taranis.
7.
Press EXIT to back out to the main menu. Switch SF is now mapped to channel 5, Aux1.
