Instruction Manual: Hot Tub
9
Figure 2: Warnings attached to the hot tub regarding the supervision of children and the prohibition of sticking
fingers into the jets.
Figure 3: Warning notice attached to the hot tub for risk of electrocution
2.5
Health and Safety Devices
The hot tub is designed and manufactured in such a way that leaks within the water-bearing
assemblies are virtually impossible when the product is used as intended. In the event that the
hot tub short circuits as the result of a leak, the residual current circuit breaker will cut off the
power to the live components.
Hot surfaces are also disguised by heat-insulating protective plates positioned on both the
stove and the flue pipe.
The minimum distance between each optional pump and the inlets/outlets inside the tub is 1
m. Therefore, it is virtually impossible for hair to get caught in the motors. It is also possible to
unscrew and re-screw the screens for the tub's inlets and outlets so they are fully removable
should any hair get caught in them.
