Instruction Manual: Hot Tub
32
5.4.4
Optional: Assembling the wooden housing for the sand filter unit
Please also see our video instructions, which you can access via the following link / QR code, for
a detailed explanation of how to assemble the sand filter unit.
https://holzklusiv.de/montage2
Please follow the steps below to assemble the wooden box:
1.
Remove the parts stored securely in the stove and in the tub.
The following parts must be
included in the scope of delivery of the hot tub (see
Figure 20
).
2.
First screw the middle section together with the outer sections using the screws provided by the
manufacturer (see
Figure 20
).
You will recognise the outer parts from their two strips, and
the middle part by its four strips. All holes have already been pre-drilled for you by the
manufacturer.
3.
Now place the cover on the three walls of the wooden housing and screw it together
using the screws provided.
4.
The wooden housing is now fully assembled and can be placed on the sand filter unit (see
Figure 21
).
Figure 20: Scope of delivery, screwing the walls together, putting on the cover
Two outer sections
Middle
section
Cover with
rounded side
