Instruction Manual: Hot Tub
49
Runni
ng
order
Maintenance and servicing steps for the hot tub (for
maintenance tasks for optional accessories please refer
to Chapters
8.3.2.1, 8.3.2.2
and
8.3.3.1
)
Time intervals recommended by the
manufacturer, in chronological order
1
Filtering the water using the sand filter unit as per Chapter
8.3.2.1
10 to 12 hours a day
(with 1 to 2 bathing sessions per week,
reduced to 6 to 8 hours per day).
2
Adjusting the pH level / alkalinity as per Chapter
8.3.1
2 to 3 times a week,
3
Filtering the water using the skimmer as per Chapter
8.3.2.2
after each use
4
Empty and clean the stove as per the instructions given in
Chapter
8.4
once the stove has cooled after each use
5
Supporting 4 and 5:
Disinfect the tub using chlorine tablets or
activated oxygen as per the description in Chapter
8.3.3
using a dispenser or according to the
manufacturer's instructions.
6
Disinfect the water using the UV lamp as per the instructions
given in Chapter
8.3.3.1
on a sporadic basis, please also note that
you can do this while bathing (provided
that no chemical additives have been used
(e.g.: Point 5 or 7), 24 hours per day)
7
Disinfecting the product using the Hot Tub Clean Care
detergent as per Chapter
8.3.3.2
Once a week
180 Hot Tub / “OPAL”: 35 to 65 ml
200 Hot Tub: 40 to 75 ml
8
Change the water as per Chapter
8.6
(please bear points 1 and 2
in mind)
Once a week
9
Clean the tub using a sponge / cleaning cloth
Every time the water is drained
10
Change the water as per the instructions given in Chapter
8.6
(please bear points 1, 2, 4, and 5 in mind)
Every 4 to 6 weeks
11
Change the water as per the instructions provided in Chapter
8.6
(please bear points 1, 2, 3, 4 and 5 in mind)
Every 5 to 7 weeks
12
Clean the flue pipe as per the description in Chapter
8.5
Twice or three times a year
13
Clean the tub using a suction pool cleaner as per the
description in
8.3.2.3
Where needed
