ASSEMBLY
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
24
ABS 3000SE / ABS 5000SE
12.4
Assembly
1.
Fix the four wheels on the groundplate,
each with four M6x20 screws.
Add at the side of the screwhead (upper
side) a washer.
Fix the screw on the lower side (see
picture) with a nut.
2.
Fix the four support legs at the corners of
the ground plate. Fix each with two M8x20
washer.
3.
Put the fan wheel housing on the support
legs an fix it with four M8x20
washer on each corner.
4.
Put the upper and lower filterbag supports
together and fix them with two M8x20
washer on the side of the fan
wheel housing.
Stick the clamps in the provided opening
of the filter bag and clamp it on the fan
wheel housing.
5.
Clamp the chip bag with the clamps on
the fan wheel housing.
Summary of Contents for ABS 3000SE
Page 57: ......
