OPERATION
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
Seite 43
METALLDREHMASCHINE / METAL TURNING LATHE ED 1000N / ED 1000NDIG
14.3
Setting the spindle speed
14.3.1
Main spindle speed
ATTENTION:
Never
change the speed before the motor / spindle has stopped completely!
The speed of the main spindle is determined by the speed controller
A
/
B
/
C
and the lever 1 -
voted 3 - 2. For both the high and low-speed stage, there are various positions.
For the appropriate speed, refer to the speed table under the two levers (
9
and
10
)
The setting can be supported by slight rotation of the chuck by hand.
14.4
Summary of Contents for ED 1000GDIG
Page 89: ......
