HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
Strana 34
DLABAČKA–MORTISING MACHINE-TALADRO HORIZONTAL-PERCEUSE HORIZONTALE- WIERTARKO - FREZARKA LBM 250C
During hoisting and shifting there must be not people near to the load hung or within
the operation scope of the crane
The shifting of the machine and its parts must be carried out only by transportation means that
correspond to the weight of the machine, e.g.
- fork-lift truck;
- wheelbarrow;
- crane;
ATTENTION
For hoisting of the machine you will need a fork-lift truck with fork long at least
1200mm.
The first thing to do after
unpacking of the machine is
to check it for possible
damages during
transportation. The
presence and the state of
the accessories to the
machine should be checked
by the list of parts
(enclosed to this Manual).
Should there be found any
irregularities related to the
machine or the accessories
thereof, you must
immediately notify the
supplier.
13.3
Deslushing of machine
Remove the anti-corrosion grease from all unpainted machine parts using kerosene, turpentine or
ordinary cleaning products commercially available.
Do not use nitro- thinners or similar diluents and by no means use water.
13.4
Foundations layout
The stable construction of the machine, ensuring precise leveling and vibration-free operation
does not require any foundations.
Besides that an additional facility can be mounted to the machine by which it can be moved in the
working room.
13.5
Assembly of the disassembled units
With view to the transportation and packaging, some parts of the machine are delivered in
unassembled condition.
You will find hereafter instructions concerning the assembly of those parts.
