HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
Strana 25
ELEKTRICKÁ ZAKRUŽOVAČKA PLECHU / ELECTRICAL ROUND BENDING MACHINE RBM 1020E
13.1.3
conical bending
The adjusting screw
(12
), the bending
roller
is tilted
.
The upper roll
(2
) is securely
locked
with the lock lever
(5).
Loosen the clamping
lever (
3) and the
handle (
4).
The
lower roll
(1)
of
the top roller (
2)
lowering.
Insert the
sheet
steel plate
between the two rollers
until it strikes
against the
bending
roller (
7).
With the adjustment
handle (4)
the lower roller
is pushed up
and
clamped by
the clamping
handle (3)
.
The bending radius
is set by
the hand wheel
(8) on
the
flexing roller
(7).
This process is repeated
with flow
,
to
the
conical shape
is reached.
ATTENTION:
conical bending occurs only with forward !
The conical curved bleach can be removed after stopping. To unlock the clamping lever (5) so
that the upper ro
ll can be pulled out of the roll bearing.
The conical curved bleach can be removed after stopping. To unlock the clamping lever (5) so
that the upper roll can be pulled out of the roll bearing. -see 15.1.4-
ATTENTION:
cylindrical set the bending roller according to the conical bending back exactly.
13.1.4
Remove the top roller
The cover plate front flip up.
The upper roll (2) safe unlocking with the lock lever
(5).
The upper roller can now be carefully removed from the
guide.
Summary of Contents for RBM 1020E
Page 36: ......
