ASSEMBLY
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
25
SHT310 | SHT310PAR
Attach the swivel mechanism (1) to one
side of the table
Insert the two threaded bushes (2) into the
boreholes on the table (3) and fix the swivel
mechanism to the table as shown in the
picture using the two screws and washer (4).
Insert the threaded bushes on the opposite
side of the table already now, as they will not
be accessible afterwards.
Attachment of the swivel mechanism to
the frame
To do this, position the two axes of the swivel
mechanism (5) at the boreholes on the frame
(6) and secure them with screws and washers
(7).
NOTE:
For this operating step 2 persons are
required to keep the frame in position until the
opposite side of the swivel mechanism is fixed
to the frame.
Attachment of the lever (8) to the swivel
mechanism (1)
Attachment of the swivel mechanism (1)
to the table on the opposite side
Fix the swivel mechanism to the table with the
two screws and washers (9).
Attach the spring (S) to the swivel
mechanism and fixation plate
For this purpose, fix one spring each to the
left and right mounting plates using the screw
(10) and nut (11).
On both sides of the swivel mechanism, hook
the spring onto screws (12).
