OPERATION
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
26
SHT310 | SHT310PAR
Completed
17
OPERATION
17.1
Operating instructions
C A U T I O N
Do not use the machine in the case of malfunction or damage!
Check the following points daily or before each use of the machine:
Check the table for damages
Check the hydraulics for leaks.
Check the brakes and castors for function.
Make sure all screws and bolts are tightened.
Do not use the table, if you notice any malfunction or damage!
17.2
Operation
17.2.1
Locking the brake
Locking brakes (6) are located at the side of the steering castors.
Press brake pedals to lock the castors.
Lift brake pedals to release the castors.
17.2.2
Loading the lifting table
The machine is designed for a maximum permissible load (loading capacity). Take care not to
overload the lifting table. Do not concentrate the load on one side of the lifting table. The load
must be distributed over at least 80 percent of the lifting table surface.
The only exception is the use of the lifting table SHT310 with the plate lifting frame SHT310PAR:
In this case, loading on one side of the lifting frame is possible within the technical limits.
17.2.3
Lifting the table
N O T I C E
Due to micro leaks in the hydraulic system, the table lowers slowly but gradually if
left in the same position for a longer period of time.
The machine is equipped with a hydraulic pump. The load is lifted by pressing the right foot lever
(4). Apply the brakes and then pump with the foot lever until the table has reached the desired
